Evnroll Classic Series Mallet Silver Satin Finish Putters RH 34.0 inches ER10 Outback Mallet w/TourTac B

Overview

ER5 Hatchback 窶・a winged mallet design with a 窶徂atched out窶・center section.

Specifications:
窶｢ CNC Milled in Carlsbad, California USA
窶｢ Head Material 窶・303 stainless steel
窶｢ Color 窶・Silver satin finish
窶｢ Weight 窶・Tour preferred swingweight at each length. One Dot @ 35窶・ Two Dots @ 34窶・ Three Dots @ 33窶・
窶｢ Face Loft 窶・2 degrees from the shaft
窶｢ Lie Angle 窶・70 degrees
窶｢ Stock Grip 窶・Custom EVNROLL white TourTac
窶｢ Length 窶・Measured from center of leading edge to butt
窶｢ Balance 窶・25 degrees toe down
窶｢ Shaft 窶・FST stepless, .370窶・tip
窶｢ Shafting 窶・Single bend mounted directly into the head

ER5 Center Shaft Hatchback 窶・a center-shafted winged mallet design with a 窶徂atched out窶・center section. Patented.

Specifications:
窶｢ CNC Milled in Carlsbad, California USA
窶｢ Head Material 窶・303 stainless steel
窶｢ Color 窶・Silver satin finish
窶｢ Weight 窶・Tour preferred swingweight at each length. One Dot @ 35窶・ Two Dots @ 34窶・ Three Dots @ 33窶・
窶｢ Face Loft 窶・2 degrees from the shaft
窶｢ Lie Angle 窶・70 degrees
窶｢ Stock Grip 窶・Custom EVNROLL white TourTac
窶｢ Length 窶・Measured from center of leading edge to butt
窶｢ Balance 窶・10 degrees toe down
窶｢ Shaft 窶・FST stepless, .370窶・tip
窶｢ Shafting 窶・straight shaft mounted over a hosel pin

ER7 FullMallet 窶・a rear perimeter weighted full mallet.

Specifications:
窶｢ CNC Milled in Carlsbad, California USA
窶｢ Head Material 窶・303 stainless steel
窶｢ Color 窶・Silver satin finish
窶｢ Weight 窶・Tour preferred swingweight at each length. One Dot @ 35窶・ Two Dots @ 34窶・ Three Dots @ 33窶・
窶｢ Face Loft 窶・2 degrees from the shaft
窶｢ Lie Angle 窶・70 degrees
窶｢ Stock Grip 窶・Custom EVNROLL white TourTac
窶｢ Length 窶・Measured from center of leading edge to butt
窶｢ Balance 窶・20 degrees toe down
窶｢ Shaft 窶・FST stepless, .370窶・tip
窶｢ Shafting 窶・Single bend mounted directly into the head

ER8.3 Players Mallet 窶・Flow neck players midmallet.

Specifications:
窶｢ CNC Milled in Carlsbad, California USA
窶｢ Head Material 窶・303 stainless steel
窶｢ Color 窶・Silver satin finish
窶｢ Weight 窶・Tour preferred swingweight at each length. One Dot @ 35窶・ Two Dots @ 34窶・ Three Dots @ 33窶・
窶｢ Face Loft 窶・2 degrees from the shaft
窶｢ Lie Angle 窶・70 degrees
窶｢ Stock Grip 窶・Custom EVNROLL red pistol grip
窶｢ Length 窶・Measured from center of leading edge to butt
窶｢ Balance 窶・60 degrees toe down
窶｢ Shaft 窶・FST stepless, .370窶・tip
窶｢ Shafting 窶・Single bend mounted directly into a flow neck heel hosel

ER10 Outback Mallet 窶・ultra high MOI oversized mallet

Specifications:
窶・CNC Milled in Carlsbad, California USA
窶・Head Material 窶・Black Armored 6061 aluminum, 303 stainless steel rear wing wt.
窶・Weight 窶・Tour preferred swingweight at each length. One Dot @ 35窶・ Two Dots @ 34窶・ Three Dots @ 33窶・
窶・Face Loft 窶・2 degrees from shaft
窶・Lie-Angle 窶・70 degrees
窶・Stock Grip 窶・Custom EVNROLL black pistol grip
窶・Length 窶・Measured from center of leading edge to butt
窶・Balance 窶・Face balanced
窶・Shaft 窶・FST stepless, .370窶・tip with black armour finish
窶・Shafting 窶・Single bend mounted directly into the head